Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New guns
04-01-2017, 11:59 AM,
#1
New guns
****
Posts: 17
Threads: 12
Joined: Dec 2016
Reputation: 0
#1
All new guns need a break in period, I recommend 500 rounds, for a start.
Then clean it and run more throught it. If at any point in time there are issues with that initial 500 there are feed issues, it could be the ammunition. Try different ammuntion before bringing it in...
An armed society is a polite society. Manners are good when one may have to back up his acts with his life.
Robert A. Heinlein
Then clean it and run more throught it. If at any point in time there are issues with that initial 500 there are feed issues, it could be the ammunition. Try different ammuntion before bringing it in...
An armed society is a polite society. Manners are good when one may have to back up his acts with his life.
Robert A. Heinlein
Reply
Website Find
Reply
04-02-2017, 08:31 AM,
#2
RE: New guns
****
Posts: 31
Threads: 4
Joined: Dec 2014
Reputation: 0
#2
I know this is important... When I first get a gun, I just want to get it to the range a shoot it. I clean the barrel, and wipe off excess oil and then put a hundred rounds through it. I've never had a gun that didn't like ball ammo. But I have had a few that would initially misfeed with certain brands of hollow points.

22's can be finicky about ammo brand. My PMR-30 and CMR-30 (22WMR) are ammo sensitive.
"What we have here is a failure to communicate..."

22's can be finicky about ammo brand. My PMR-30 and CMR-30 (22WMR) are ammo sensitive.
"What we have here is a failure to communicate..."
Reply
Find
Reply
04-02-2017, 04:10 PM,
#3
RE: New guns
**
Posts: 607
Threads: 35
Joined: Jan 2015
Reputation: 0
#3
(04-02-2017, 08:31 AM)The Sheriff Wrote: I know this is important... When I first get a gun, I just want to get it to the range a shoot it. I clean the barrel, and wipe off excess oil and then put a hundred rounds through it. I've never had a gun that didn't like ball ammo. But I have had a few that would initially misfeed with certain brands of hollow points.

22's can be finicky about ammo brand. My PMR-30 and CMR-30 (22WMR) are ammo sensitive.

Interesting enough, I've seen multiple YouTube videos where reviewers had issues using ball ammo but not HPs in the Remington RP-9. Apparently, the feedramp in some of them is too long for the ball ammo and it gets jammed under it causing a ftf. The HPs, not having the little extra length of the ball round, feed fine.

As for breaking in a new handgun, one of the things I do is load it with dummy rounds and work the action, while watching TV. This helps smooth out the action without having to worry about weather or lighting conditions outside. Amazon has some nice brass dummy rounds in a set of 10 for not much money. They weigh the same as live rounds so they allow you to get used to the weapon's balance, as well.
(04-02-2017, 08:31 AM)The Sheriff Wrote: I know this is important... When I first get a gun, I just want to get it to the range a shoot it. I clean the barrel, and wipe off excess oil and then put a hundred rounds through it. I've never had a gun that didn't like ball ammo. But I have had a few that would initially misfeed with certain brands of hollow points.

22's can be finicky about ammo brand. My PMR-30 and CMR-30 (22WMR) are ammo sensitive.
Interesting enough, I've seen multiple YouTube videos where reviewers had issues using ball ammo but not HPs in the Remington RP-9. Apparently, the feedramp in some of them is too long for the ball ammo and it gets jammed under it causing a ftf. The HPs, not having the little extra length of the ball round, feed fine.

As for breaking in a new handgun, one of the things I do is load it with dummy rounds and work the action, while watching TV. This helps smooth out the action without having to worry about weather or lighting conditions outside. Amazon has some nice brass dummy rounds in a set of 10 for not much money. They weigh the same as live rounds so they allow you to get used to the weapon's balance, as well.
Reply
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | Red Dot Arms Forum | Return to Top | | Lite (Archive) Mode | RSS Syndication